Channel Menu - RCA MR27300 User Manual

THE CHANNEL MENU
The Channel menu contains all the commands used to control your
channels, including custom-budding your channel list
Signal Type Displays a toggle that lets you select the current antenna
type
Antenna Choose this if you are currently using an off-air antenna
for UHF/VHF TV signals
Cable TV Choose this if you are currently using cable or a cable
box for TV signals
Auto Channel Search Selecting this option tells the TV to search
automatically for all the channels available through the antenna input
When the TV finds an active channel, it places _t in the channel list
Inactive channels. (Weak stations or channels with no signal at all) will
be removed from the channel hst You may interrupt this process by
pressing the MENU button )
Lists and Labels Displays a control panel that lets you custom-budd
your channel scan list and choose a four-character label for each
channel Use the VOL +/- buttons to move left and right between fields,
use the CH^/v buttons to move up and down enter settings and create
labels Press MENU to exit
Channel Number Use the CH^/v buttons to scroll through the
channel scan list You can also enter the channel number dtrectly
using the number buttons
Channel Labels Use the CH^/v buttons to enter a four-character
label for each channel
Scan List Only the channels included in the Scan list are avadable
when you scan up and down using the CH ^Iv buttons Use them to
indicate whether the channel number indicated _sincluded (YES) or
ts not included (NO) m the channel scan list.
Channel
1 SignalType: ANTENNA
2 Auto Channel Search
3 Listsand Labels
0 Exit
The Channel menu
Lists and Labels
Chart Chan Scan
# Labe_ L_st
16 NBC YES
Press MENU to exit
The Lists and Labels screen
I Tip
You can always press MENU to exit
back to the prewous screen
]
6