Table of Contents
Advertisement
Getting Started
Start-up
The steps below get your TV connected and ready to watch.
Put Batteries in the Remote
1
Pull off the cover of the battery compartment.
2
Place the two AAA batteries into the remote, matching
the + and - end of each battery in the compartment
3.
Replace the cover.
Turn on the TV
Press POWER on the TV or remote.
Place All Available Channels Into Memory
1
PressMENUontheremotecontrol,
thenselectChannel,
thenAutoChannelSearch
2.
Select which channel list you'd like to find channels for (List A is the default).
No_e:lnpu_, (VID,SVID, e tc.)must headded to the active channelfist separately before they can be _cccssed Refer to pagesat the
end of this ehoptar for more infarinadon on _heCharm el menu and List ElLabels
Set the Time
To set the time, select automatic
setting
of the time, or to prevent viewers from accessing the Current Time and
Schedule options, go to page 9.
If the control panel is not set to the current time, use the arrow and digit buttons on the remote control to
make changes. You can also enter numbers by using the up and down arrows on the remote.
The CIonePRO
TM
If several lVs need to be programmed with the same menu settings, an optional
ClonePRO remote can be used to
copy all of the menu settings from one TV into another TV to reduce installation
time. Information
can be both
downloaded
to and uploaded from the ClonePRO using the DSCl port on the ]V's back panel or using the IR
sensor. A CIonePRO can be obtained from your RCA commercial distributor.
To use the ClonePRO now, go to
page 22 for information.
If you want to set other menu options before using the ClonePRO go to the next pages
of this chapter. Note you can use the CIonePRO at any time.
The master Main menu.
Understanding
the Menus
This television
displays two levels of menus: master and basic.
The master menus are accessible by pressing MENU on the master remote (CRKI 7TDI ). The master Main
menu will always display eight choices.
The basic menus are accessible by pressing MENU on a basic remote (CRKI 7TCI or other remote] or the front
panel. The choices available on the basic menus and control panels will vary depending on limits set by the
master user and the input selected. You can turn off the basic menu completely
through
the Access PcPower
Options menu. For more information
on the effects of master user choices on the basic menu and basic user
functionality,
go to the next pages of this chapter.
Noze: Options set in the master menu are stored m non vain tile memor}< If an y op tions are changed in the basic menu, and
then the 7V is turned off, the IV defdult_ to the master menu settings once it's turned back on.
The basic Main menu. The choices
available
in this menu change
according
to limits set by the master
/lseh
Using Master
and Basic Menus
Menus and choice lists use the point and select rule to navigate, but control panels use a variety of methods
to adjust features on your TV. The following
pages detail how to use these controls to customize the
functions
of your R/.
The first menu is called the Main menu
Press MENU on the remote (master remote for master menu; basic or
universal remote for basic menu) or on the front panel (basic menu) to bring up the Main menu.
Menu choices take you to another menu or a control panel There are two ways to select a menu item:
i
Point with the arrows and then select with MENU or OK
•
Press a digit button
on the remote. For example, in the master Main menu, press 3 to go straight to the
Channel menu.
6
Graphics contained
within this publication
are for representation
ont}4
Chapter 1
Advertisement
Table of Contents
