Table of Contents
Advertisement
ANTENNA,
CABLE, CABLE BOX OR VCR
TV (Back Panel)
I
Connect
Your
TV
Connect the cable from your cable system or off-air antenna to the cable in-jack on the back
of the TV, as shown on the left.
Front
Panel Jacks
Use the jacks on the front panel of your TV to connect components
to your TV.
You can access the component
you connected
by pressing the INPUT button on your remote
until INPUT appears
on the screen.
VIDEO (in)
Allows you to connect
a component
such as a VCR, camcorder
or Internet
access device.
AUDIO (mono
in)
Receives audio signals from another component
such as a VCR,
camcorder
or Internet access device.
Audio/Video
cables
Coaxial cable
Cables
Needed
to Connect
Components
to Your
TV
_l_e pictures on the left show the cables needed
to connect components
to your TV.
Notes: Audio/Video cables (AN cables for short) are often sold as a bundled set. When
connecting components to your TV, use the cable with the yellow end to connect the
video and the cable with the red end to connect the audio. Leave the cable with the
white end (if there is one) unconnected.
Graphics contained
within
this publication
are for representation
only.
3
Advertisement
Table of Contents
