Programming The Remote; Information; Components - THOMSON D40GW10YX1 User Manual

Using the Remote Control
Indicator
VCR_ ON.OFF
TV
DVD VCR2 AUX SAT.CABLE
_wu_ SKIP
GUIDE GO BACK
DISC MENU INFO
MENU CLEAR
10 20 30
70 80 90
INPUT SOUND.ANT
©o@
REVERSE PLAY FORWARD
RECORD STOP PAUSE
PIP SWAP CH - CH
0000
_pip _
Note: TheVCR 1,DVD,VCR2,andSAT*CABLE buttons
also turn on most RCA, G E,and Proscanproducts.
Tip
To turn off all the RCA, GE, and Proscan components
that
are connected to the _ press ONoOFF twice within two
seconds.
This feature only works with most RCA,GE,and Proscon
products.
The Buttons on the Remote Control
(O-9) Number Buttons Enter channel numbers and time settings directly through the remote
control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits.
To enter a three-digit channel, press and hold the "1" button until "1" and two dashes (- -)
appear, then add the second two digits. Example: to tune to channel 123, press and hold 1 until
"1- -" appears, release the 1 button and then press 2 and 3.
Arrows Used to point to different items in the lV menu and to adjust the menu controls.
Moves the PIP window when no menus are on the screen. Also switches the two POP windows
when no menus are on the screen. For Zoom use, go to next page.
AUX Puts the remote in AUX mode. Can also be programmed to operate most brands of an
additional remote-controllable component.
CH + or CH - Scans up or down through the current channel list. Press once to change the
channel up or down; press and hold to continue changing channels.
CH+ or CH- PIP When using PIP or POP, changes the channel in the picture window.
CLEAR Removes any menu or display from the screen and returns you to normal viewing.
DISC MENU No function available in 1V mode. If operating an RCA, a GE or Proscan DVD player,
for example, brings up the Disc menu.
DVD Puts the remote in DVD mode and, if Autotuning is enabled, will turn on the IV and tune to
the correct input channel.
FREEZE When watching IV, freezes the picture until you press another button to resume
normal IV viewing.
Note:Do not use the Freezefeature for an extendedperiod of time. Thiscan cause theimage to bepermanently
imprinted on the picture tub& Suchdamage is not covered by your warrant_ Pressany button to unfreezethe
picture at any tim&
GO BACK Returns you to the previous channel.
GUIDE Brings up the Channel Guide menu.
INDICATOR Indicates the programming mode when programming the remote to control
components.
INFO Brings up status display; press again to dear the screen.
INPUT Press to toggle through the available input sources (VlD1, VlD2, ERNT,CMP1, CMP2 and
DVL Press the CH+ or CH- button to resume lV viewing).
MENU Brings up the Main menu.
MUTE Reduces the 1V's volume to its minimum level. Press again to restore the volume.
OK/FREEZE When in the menu system, selects highlighted items. When watching IV, freezes
the picture until you press another button to resume normal 11/viewing.
ON*OFF When in 11/mode, turns the 11/on and off. If in another device mode (VCB, DVD,
SAT.CABLE, etc.) and programmed, will turn the device on and off.
PIP Press once to bring up the small picture-in-picture window. Press again to bring up the
picture-outside-picture (POP) windows. Press to remove POP. (See Chapter 3 for more
information about using PIP.)
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control
for some remote-controllable VCRs, DVD players, laserdisc players, tape decks, and CD players.
SAT*CABLE Puts the remote in SAT.CABLE mode and, if Autotuning is enabled, will turn on
the lV and tune to the correct input channel.
SKIP Press once before changing channels and the 1V will wait 30 seconds before returning
you to the original channeL Press repeatedly to add more time.
SOUND*ANT Displays the Picture and Sound preset settings at the bottom of the IV.
SWAP When using PIP, swaps the main picture with the PIP window. When using POP, swaps
the left and right pictures.
1V Turns on the IV and puts the remote in IV mode. Also displays current status.
Chapter 2
Graphics contained within this publication ore for representation only.
13