Table of Contents
Advertisement
To enter a number
greater
than 99, press and
hold "1 " to enter the hundreds
digit,
then
press the two remaining
numbers.
Channel Menu
Signal Type
Displays a choice list that lets you select the current antenna
type. This option does not appear when tlle GUIDE Plus+ system is set up.
UHF/VHFAntenna
Choose this if you are currently
using an off-air
antenna
for "1_ signals.
Cable TV Choose this if you are currently using cable or a cable box for
"1_ signals.
Auto
Channel Search
"Pells tlle "1_ to search automatically
for all the channels
available through the antenna input. When the "IV finds an active channel, it
places it in the Normal channel list; inactive channels
(weak stations or
channels
with no signal at all) will be removed
t?om tlle channel list. If you are
using a cable box and have set up the GUIDE Plus+ system, tllis option does
not appear.
List and Labels
Displays a control panel that lets you edit your Normal
channel list and choose a sLx-character label for each channel. Follow the on-
screen directions
to enter your channels
and other intk)rmation.
Channel #
Use the up and down arrows to scroll up and down through
the channels
available via your antenna.
You can enter tl_e channel number
directly using the number buttons.
Normal
List
Only the channels
included
in the Normal list are available
when you scan up and down using channel up and down. Use the up and
down arrow buttons
to indicate whedmr the channel number indicated
is
included (Ye.{) or is not included (No) in the Normal channel list.
ChannelLabel
Use the up and down arrow buttons to enter a sLx-
character label tBr each channel. Hold tlle button down to scroll quickly
through tlle characters. "II_e "1_ can store up to 27 labels in memoly.
Auto
Tuning
Displays a choice list that lets you set up tlle "1_ to automatically
tune to the correct input channel when you press a component
button (VCR1,
DVD, VCR2, or SAT°CABLE) on the remote. Go to Chapter 3 for details about
the Auto Tuning feature.
Time Menu
Sleep Timer
Displays a control panel that lets you select the amount of time
you want to give the "1_ belk)re it shuts ilself olT.
Schedule
Displays a control panel that lets you set up a schedule
for turning
the "1_ on and off"automatically.
Reminder: you must turn the schedule
On. "II_e
on-screen
directions
guide you through tlle steps needed
to set tlle schedule.
Set Time
Displays a control panel that lets you enter the current time. "II_eon-
screen directions
guide you through tlle steps needed
to set the time. If your
GUIDE Plus+ system is set up, il will automatically
update your time and this
option will not appeai:
52
Advertisement
Table of Contents
Troubleshooting
