RCA F35670 User Manual page 31

Reference
Trouble Checks
Trouble
Checks and Adjustment s
Remote
.Remote lockup
Buttons don't work when you
press them
Remove batteries and hold dow_ one or more buttons for several seconds
to drain the microprocessor inside the remote and reset it. Re-instaU the
batteries and try remote again.
Press TV to set the remote to control the TV. See buttons on page 6-7.
•
Works p art
or none of the
time
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Press "IV so remote will control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Can't select certain channel Press number buttons. Channel may not be in memory. See Autoprograrn
on page 20.
Make sure TV/VCR switch on VCR is in the TV position.
For numbers over 100, press and hold I until 1- appears/then press the
other two numbers.
Set Cable/Air feature to Cable for channels higher than 69. See page 25.
Sound
Noisy stereo reception
Picture okay, no sound
Turn Stereo off. The stereo broadcast may not be clear. See page 18.
Press VOLUME + or MUTE to restore sound.
Make sure TV speakers are on. Details are on page 19.
Picture okay, sound poor
Try another channel.
Try adjusting the Tone. See page 18.
Change Stereo to off. The stereo broadcast may not be clear. See page 18.
No stereo on stereo station
Make sure Stereo is turned on. See page 18.
29