Basic Operation; Dvd Setup Mode; General Setup - Pyle PTC16LD Operating Manual

THE L)VD Setup Menu System
THE DVD SETUP MENU SYSTEM
8.1 Basic Operation
1. PressTV/DVD button on the remote controller or DVD button on the TV set to turn on (or off)
DVD.
2. Press OPEN / CLOSE button to load disc into disc tray.
3. Press OPEN / CLOSE button to close the tray.
Hold the disc without touching either of its surfaces, position it with the printed title side facing up,
align it with the guides, and place it in its proper position.
8.2 DVD Setup Mode
• Setup Mode provides the menu for the configuration of General Setup Page, Speaker Setup Page,
DolbyDigital, Setup ,Video Setup Page and Preference Page.
• Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP button and the
OK button.
• Press the SETUP button first, enter into SETUP menu, then press the DIRECTION RIGHT button,
you can enter into the next Sub-menu.
• Press the SETUP button again to exit the Setup Menu.
8.2.1 General Setup
TV Display
• PS
This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown
on the screen, but with some parts cut automatically.
"LB
This is selected when the player is connected to a normal TV. Wide-screen images are shown on the
screen, with black belt on the top and bottom.
+ ++,+ m®,m+ i
• Wide
This is selected when the player is connected to a wide-screen TV.
Angle Mark
This only works when there is an angle mark on the disc. Select ON, the screen shows the mark
when playing DVD.
• ON
• OFF
23