Copying And Editing Tapes Using Two Vcrs - GE VG4065 User Manual

Copying and Editing Tapes
Using Two VCRs
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram below.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input).
4. If you are using coaxial cables for the connection, tune
recording VCRto channel 3 or 4_the one selected on the
playback VCR.
If you are using audio/video cables, select the line input on
the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6-9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
Two VCR Connection
OR_ANTENNA
PLAYBACKVCR
RECORDING VCR
TOTV TOTV
Note that the two VCRSused in the diagram may not look
exactly like the VCRSyou are connecting. The important thing
is to match the proper cable connections; OUT jacks of the
playback VCR connect to IN jacks of the recording VCR.
33