Samsung EK-GC110 User Manual page 113

Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth
compatible devices.
Note: Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
Disconnecting a paired device
Disconnecting a paired device breaks the connection
between the device and your camera, but retains the
knowledge of the pairing. At a later point when you wish to
reconnect the device, there is no need to setup the
connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap the previously
paired device (from the bottom of the page).
3. At the Disconnect? prompt, tap OK to confirm
disconnection.
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your camera or it is powered off.
Deleting a paired device (unpair)
Deleting a device from your list removes its "connection
record" and upon reconnection would require that you re-
enter all the previous pairing information.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap
previously paired device. This opens the connected
device's menu options.
3. Tap Unpair to delete the paired device.
4. Tap Rename to change the name of the paired device.
5. Tap Call audio to enable or disable call audio from the
paired device.
next to the
Connections 109