To Change The Signal Type; To Add Or Remove Channels - GE VGS320 User Manual

AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this
takes about one to two minutes. The lowest channel is tuned
once the search is complete. Pressing CHANNEºL up or down
now selects the active channels.
To Change the Signal Type
1. Press MENU to display theVCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between CABLE and
ANTENNA.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
0
Exit
To Add or Remove Channels
You may want to add or delete channels after you Auto Channel
Search, especially if some of the channels have weak signals or
you don't want to watch them.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 2 to displaythe ADD/REMOVE CHANNELS screen. Use
CHANNEL up or down, or number buttons, to go to the
channels you want to delete or add.
Selecting Channels
The CHANNEL up and down
buttons access those channels
active in your VCR channel list.
You can still access channels not
in the channel list by using the
number buttons on the remote.
10