Rear Connections - Philips Flat TV 42PF9936 User Manual

Buttons on top of the TV
)
[_ ÷]÷[ ..... ÷]
Should your remote be lost or broken you can still
change some of the basic settings with the buttons
on top of your TV.
Press:
• the - /1 + button to adjust the volume;
• the - P/¢H + button to select theTV channels or
sources,
Press the MENU/OK button to summon the main
menu without the remote control,
Use:
• the/1 + button and the - P/CH + button to
select menu items in the directions as shown;
• the MENU/OK button to confirm your selection.
Press the NENU/OK button again to turn off the
menu,
Camcorder, video games, headphone
Camera, Game or Camcorder
0 Connect your camera, game or camcorder as shown,
O Connect to VIDEO (_) and AUDIO L (_ for mona
equipment. For stereo equipment also connect
AUDIO R (_).
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the S-VIDEO input
(_ and AUDIO inputs (_)_
Do not connect cable (_ and (_) at the same time This
may cause picture distortion ._
Headphone (only for 30PF9946)
0 Insert the plug into the headphone socket ,_, as shown.
Press n_ on the remote control to turn off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm. The headphone socket has a 3.5 mm jack.
Rear connections
There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to theTV.
AVl can handle YPbPr and CVBS; AV2 CVBS and Y/C; AV3 HDMI and VGA - VGA can handle VGA, SVGA (and if
30PF9946 also XGA) and 480p, 576p, 720p and 1080i.
AV3 AV1im,i