Selecting Cycles And Options/Starting Dishwasher - Maytag DWU8860AAX Owner's Manual

SELECTING CYCLES AND OPTIONS/STARTING DISHWASHER
APPROX.
SEQUENCE CYCLE TIME WATER USE
Rinse 7 Mira 2 Gal.
5 Gal.
CYCLE SETTING
RINSE & HOLD:
Use to rinse a relatively few soiled dishes
which are to be held until the dishwasher is
full. Turn knob to Rinse & Hold.
QUICK WASH/RINSE:
Use to quickly wash dusty or very lightly-soiled
dishes you wish to store or reuse immediately.
Turn knob to Quick Wash/Rinse.
LIGHT/CHINA:
Use for china and crystal and for loads
containing medimn to light amounts of soil.
Turn knob to Light/China.
NORMAL CYCLE: ...............
Use for washing loads containing normally
soiled dishes. This would include dishloads
with problem soils. Turn knob to Normal
Cycle.
POTS & PANS:
Use for loads with heavy or dried soils. Turn
knob to Pots & Pans.
Wash
2 Rinses
Rinse
Main Wash
2 Rinses
Dr),
PreWash
Rinse
Main Wash
2 Rinses
Dr?,
PreWash
2 Rinses
Main Was|t
2 Rinses
DR
17 Min.
41 Min,
35 Min.
76 Min. ÷ Heating Delay °
49 Min.
35 Min.
84 Min. + Heating Delay °
64 Min.
,35 Min.
99 Min. + Heating Delw _
7 Gal.
9 Gal.
1! GaI.
*The TEMP BOOST SENSOR may extend the main wash to heat the water to proper temperatnre. The HEATING
DELAY indicator will light when the cycle is being extended due to low water temperatures,
PAG E 8