4.
Use yourTV
4.2
WatchTV
This section helps you perform
basic TV operations.
4.1
Switch yourTV
on/off
or to standby
To switch theTV
on
•
Press I(_ POWER
at the right side of the TV.
Switch
channels
1.
Press a number (t to 999) or press CH+
or CH-
on your remote
control.
For digital channels, press a number (1 to 999) followed
by a dot
.... and then the corresponding
sub channel number (1 to 999).
Ex.
108.30.
2.
Press PREV
CH to return to the previously
viewed TV channel.
gEM0
@ Note
You can also switch channels by pressing CHANNEL
- or + on the
side controls
of the TV.
Adjust
volume
1.
Press VOL+
or VOL-
on your remote
control.
.
2.
Press MUTE
on your remote control
to mute the sound.
Press MUTE
again or press VOLUME
- or + to restore the sound.
To switch to standby
•
Press _
on the remote control.
To switch on from
standby
without
the remote
control
•
Press _
POWER
at the right side of the -iV to switch the TV off.
•
Press _
POWER
again to switch the TV on.
To switch off
•
Press _
POWER
at the right side of the TV.
I
iijiii
ZCC&
ZZCLL&
ZC&
J
@ Note
Energy consumption
contributes
to air and water
pollution.
When
the
power cord is plugged in, your-iV
consumes energy. Your TV has a very
low standby power consumption.
@ Note:
You can also adjust the volume by pressing VOLUME
= or +
on the side controls
of the TV.
To increase the headphone
volume, press the volume button
on the TV
or remote
control.When
headphones
are plugged into the TV, the loud
speakers are automatically
muted.
EN-IO