Panasonic Lumix DMC-ZS7 Operating Instructions Manual page 32

®When [TRAVEL DATE] isdisplayed inwhite w ith aminus sign, the [HOME] date
is one
day in advance of the [DESTINATION] date (this is recorded).
®To print the number of days that have passed, either use [TEXT STAMP] or print using
the software on the supplied CD-ROM 'PHOTOfunSTUDIO'.
®[TRAVEL DATE] cannot be set for motion pictures recorded in [AVCHD Lite].
if you set your travel schedule and record pictures, which day of your trip the picture was
recorded will be recorded.
Set-up: • Clock must be set in advance (417, 19).
Select [TRAVEL DATE] from Set t .ereturn date int.e
[TRAVEL NODE] menu (_20) same way
° The color of the date frame from the
departure date to the return date
changes.
The departure date and return date
you set are displayed on the [TRAVEL
MODE] menu screen.
==Clearing the information
After the return date, the information
is automatically cleared. To clear the
information before this date, select [OFF]
in step @.
• If [TRAVEL DATE]is turned [OFF],
[LOCATION]is also automaticallyturned [OFF].
®The number of days elapsed is displayed for approx. 5 sec. when switching from playback
to Recording Mode or when power is turned on. (_ displayed at bottom-right of screen)
®The travel date is calculated from the set departure date and the date set in the
camera's Clock. When destination is set in [WORLD TIME], days elapsed are
calculated based on local destination time.
®The set travel date is saved even when the camera's power is turned off.
®When [TRAVEL DATE] is set to [OFF], the number of days elapsed is not recorded. It is
not displayed even if [TRAVEL DATE] is set to [SET] after recording.
® If settings are made before departure date, number of days to departure are displayed
in orange with a minus sign (but not recorded).
®When [TRAVEL DATE] is displayed in white with a minus sign, the [HOME] date is one
day in advance of the [DESTINATION] date (this is recorded).
®To print the number of days that have passed, either use [TEXT STAMP] or print using
the software on the supplied CD-ROM 'PHOTOfunSTUDIO'.
VQT2R20
91