Table of Contents
Advertisement
Optional Equipment Connections
VCR Connection
Follow this diagram when connecting your television to a VCR only.
INSTALLATION
_VCR
TERMINALS ON BACK OF PTV
CABLES NOT SUPPLIED
IncomingCable
Note:
The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
V_mwing a television program
Procedure
1.
Select ANT1 in the SET UP menu under Prog Chen (Program Channels).
2.
Tune the television to the television program you want to view.
Viewing
a video
Procedure
o
option A
1.
Select ANT1 in the SET UP menu under Prog Chen (Program Channels).
2.
Press the TVNIDEO
button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3.
Begin the video.
O
Option B
1.
Select ANT2 in the SET UP menu under Prog Chart (Program Channels).
2.
Tune the television to Channel 3 or 4, depending on your VCR.
3.
Begin the video.
Recording a television program
Procedure
C]
Option A (Recording and viewing the same program)
1.
Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2.
Tune the television to Channel 3 or 4, depending on your VCR,
3.
Using the VCR, tune to the television program you want to record.
4.
Begin recording.
_l
Option B (Recording one program while viewing another program)
1.
Select ANT1 in the SET UP menu under Prog Chart (Program Channels),
2.
Press the W/VIDEO
button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc,) connected to your VCR.
3.
Using the VCR, tune to the television program you want to record.
4.
Begin recording.
5.
Press the W/VIDEO button on the remote controlto switch back to TV mode.
6.
Tune the television to the television program you want to view.
la
Advertisement
Table of Contents
