LG LMVM2277ST Installation Instructions Manual page 17

STEP 6: ATTACH THE OVEN TO THE WALL
5. Roof venting installation: See Figure 33.
Install ductwork through the vent opening in the
upper cabinet. Complete the venting system through the
roof according to the method needed. See "Prepare The
Venting System" STEP 2.
Use caulking gun to seal the exterior roof opening
around the exhaust cap. See Figure 7 on page 8.
6. Use the power supply cord clamp to bundle the power
supply cord. Install the power supply cord clamp, using a
screw as shown in Figure 34, to the inside of the cabinet.
7. Place the filter into the opening in the bottom of oven.
Push the button backward and lock into place.
Release the button.
8. Plug in the power supply cord.
9. Read your Owner's Manual, then check the operation of
your microwave oven.
damper
Figure 33
power
supply
cord
c amp
Figure 34
Figure 35
-17-