Panasonic TC-P50C1 Operating Instructions Manual page 15

28
ow to Use enu Functions
Various menus allow you to make settings for the picture, sound, and
other functions so that you can enjoy watching TV best suited for you.
Display menu
MENU
® Displays the functions that can be set
(varies depending on the input signal)
Select "Setup"
[] Menu list
Menu item "
Channel surf mode
Language
Clock
ANT/Cable setup
Input labels
Pixel orbiter
Time (minutes)
4:3 side bars
Scrolling
bar
VIERA Link
Power on link
Power off link
Stand-by
power
save
Auto power
stand-by
Default speakers
No signal for 10
minutes
No activity for 3
hours
[] Press to exit from
a menu screen
EXIT
[] Press to return
to the previous
screen
RETURN
0
Select the item
Display Sub Menu SUB
MENU
Select the item
next
•Sub
Menu
Auto power on
Play SD card
automatically
About
Reset to defaults
menu list
Item
Channel surf mode
Set favorite
Edit CH caption
Signal meter
(Continued)
Adj ustments/Configu rations (alternatives)
Sets the mode to select the channel with Channel up/down button
(AIIIFavoritelDigita! only/Analog only)
_ Favorite: Only channels registered as FAVORITE (p. 20)
Selects the screen menu language (p. 16)
Adjusts the clock (p. 17)
Sets channels (p. 39)
,'m_e ......
Language
Clock
ANT/Cable setup
Selects the terminal and label of the external equipment (p. 41 )
Prevents "image retention" with Wobbling. (Automatic/Periodic)
® Automatic: Shifts the display image automatically.
® Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the "Time (minutes)" menu.
Sets the time for "Pixel orbiter-Periodic" setting. (1121314)
Pixel orbiter
[Time (minutes)_]
Change the brightness of the side bar (OfflDarklMidlBright) (4:3 mode only)
® The recommended setting is "Bright" to prevent panel "Image retention". (p. 48)
Press "OK" to start horizontal "Scrolling" on the screen (p. 48)
4:3 side bars_
Scrolling bar
Controls equipment connected to HDMI terminals (p. 32) (On/Off)
® "Power off link", "Power on link", "Stand-by power save", "Auto power stand-by" and "Default speakers"
cannot be selected if "Off" is set.
Sets "Power on link" of HDMI connection equipment (p. 32) (Yes/No)
Sets "Power off link" of HDMI connection equipment (p. 32) (Yes/No)
Set "Stand-by power save" of HDMI connection equipment. (p. 32) (No/Yes)
Set "Auto power stand-by" of HDMI connection equipment. (p. 32)
(No/Yes (with reminder)/Yes (no reminder)
Selects the default speakers (p. 32) (TV/Theater)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Enable/Disable)
Note
_ Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD mode" or Digital channel.
_ "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV is turned
on for the first time after turning the power off by "No signal for 10 minutes".
_ The on-screen display will flash 3, 2 and 1 to indicate the tast three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or side panel key
continues for more than 3 hours. (Enable/Disable)
Note
® Not in use when setting "Auto power on" or "On/Off Timer".
_ "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV is turned on
for the first time after turning the power off by "No activity for 3 hours".
_ The on-screen display will flash 3, 2 and 1 to indicate the tast three (3) remaining minutes prior to the shut-off.
Turns TV On automatically when the cable box or a connected device is turned On (No/Yes)
TVAC cord must be plugged into this device. TV comes on every time the power is restored.
_ The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 42)
VlERA Link
Poweron link_
[P..... ff ,ink_
a,d:b_' ....
[Default speakers
Auto power on_
Set "Thumbnail" or "Slideshow" to play back SD cards automatically. (Slideshow/Thumbnail/Set later/Off)
Displays TV version and software license. [About ]
Performing Reset will clear all items set with Setup, such as channel settings. (p. 38)
[Reset to defaults
]
Adj ustments/Configu rations (alternatives)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)
Sets favorite channels. (p. 20)
Changes the station identifier. (p. 39)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 39)
®
-c_o
Pc
_t'--
.L_o0
29