Table of Contents
Advertisement
SETUP MENU
PROJO SETUP
Purpose
Lets you verify and adjust, if needed, the dynamic color
convergence of the TV picture.
If you move your TV from its original location, or if after
time, you notice color "fringes" around opjects in the picture,
you may want to realign the colors by adjusting the
convergence as described in the following steps.
AUTO PROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
PROJO SETUP
I
[
TO CONVERGE
J
Selecting Projo Setup
To Use PROJO SETUP
1.
Press ADJUST
(ADJ) Left!Right
to view the conver-
gence lines.
If the display
appears
as four intersecting
lines, all
white in color, no adjustment
is necessary.
If there are more
than four lines,
each a different
color, you must adjust the convergence.
2.
Use SOURCE
key to select the Red reference
color.
3.
Use the SELECT
and ADJUST
arrow
keys
(Up,
Down,
Left and Right) to adjust the Red lines until
they are on top of the Green lines.
4.
Use SOURCE
key to select the Blue reference
color.
5.
Use the SELECT
and ADJUST
arrow
keys
(Up,
Down, Left and Right) to adjust the Blue lines until
they are on top of the other lines.
All lines should
now be white.
PRESSSOURCEKEYTO SELECT COLOR _'
PRESS ARROW KEYS TO CONVERGE
I'
Correct Convergence
PRESS SOURCE KEh'TO SELECT COLOR
PRESS ARROW KEYS TO CONVERGE RED
(OR BLUE)
Incorrect
Convergence
273s-o
7 -- 5
Advertisement
Table of Contents
