LG HBLG5004 Owner's Manual page 15

Operating Instructions
If you turn off the air conditioner or switch from cooling to
the fan, wait at least 3 minutes before setting to cooling again,.
POWER -Turns air _nditioner off_
i> FAN SPEED "LOW"Low speed fan operation with c_ling or not.
i> FAN SPEED "HI" High speed fan operation with c_ling or not.
This automatically condo, is the temperature of ind_r air: Turn the knob _ that
arrow _ints to the _oler marks for more moderate c_ling.
Nodal Fan
i_ Turn the FAN speed mode switch to the "Hi" or the "LOW" setting
2. Set the thermostat control to the temperature mark "Fan Only"
Nodal cooling
1. Turn the FAN speed m_e switch to the "HI" or tlhe "LOW" setting
2. Set the thermostat control to the desire temperature (the mid-_int is a go_
starting position).
If the room temperature is not satisfactory after a reasonable time, adjust the
control to a warmer setting, as appropriate.
Maximum cooling
1, Turn the FAN speed m_e switch to the "HI" setting
2. Set the thermostat control to the cooler temperature mark.
Quieter operation
1. Turn the FAN speed mode switch to the "LOW" setting
2 Set the thermostat control as needed,
Room A# Con,difioner 15