Turning On Tv; Channel Setup - LG 32LG30 Owner's Manual

MFL34797048-en-8-ING 9/8/2008 3:54 PM Page 25
i
S]%
t r
i
WATCHING TV
TURNING ON TV
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the _/I, INPUT, (AT or ^ v ) button on the TV or press the POWER
INPUT, CH(^ or v ), Number (0~9) button on the remote control.
Select the viewing source by using the INPUT button on the remote control.
i This TV is programmed to remember which power state it was last set to, even if the power cord is out.
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
N
Z
<
CHANNEL SETUP
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the
channel list.
Run Auto Tuning again after any Antenna/Cable connection changes.
Select CHANNEL.
Select Auto Tuning.
Select Yes.
Run Auto tuning.
Return to the previous menu.
Return to TV viewing.
i A password is required to gain access to
Auto Tuning menu if the Lock System is
turned on.
2S
i
........................ 4:,,,,,_.,,,,,I .........................
\j/
i