Nikon COOLPIX S6100 User Manual page 14

When transfer is complete, the ViewNX 2 screen is displayed (ViewNX 2 default setting)
and transferred images are displayed.
m
o
B
For more information on using ViewNX 2, refer to the ViewNX 2 help information
([]_ 141).
Disconnecting the Camera
Do not turn off the camera or disconnect tile camera from tile computer during
transfer.
When transfer is complete, turn offthe camera and disconnect the USB(:able.
The camera turns offautomatically if there is no communication with the
computer for 30 minutes while the camera is connected via the USB(:able.
_1_ Charging the Battery
The charge lamp slowly blinks green while the battery inserted into the camera is charging ([.]]_)142),
140