Step 3. Tighten
wing nuts.
Step 4, Raise complete
handle assembly
until it
clicks into place.
Make sure not to kink the
control cables.
Handle Assembly
Step 5. Pinch lower handle against mounting
IStep 7, Attach controt cables to handle with pull
bracket with pliers.
I
ties found
on the handle,
Step 6. Move hairpin clip from outer to inner hole
l
on left and right handle mounting
brackets.
inner Hole/--
_
J
Pinch
Here
Hairpin Cffp
\
\
Step 8. Squeeze
the blade control handle against the upper handle and pull out the starter
rope slowl
Step 9, Thread the starter rope into the rope guide.
Starter
Rope
Look Here
Roe
Guid_
950 g5g
8