Dell S2309WFP User Manual page 18

Nature
Hue
Saturation
Reset Color Settings
Back
Display Settings
Horizontal Position
Vertical Position
Sharpness
Pixel Clock
Phase
Reset Display Settings
Back
Mode suitable for nature scenes.
This feature can make the video image color shift from green to purple. Use this feature to adjust the skin tone. Use
increases the green hue in the image
increases the purple hue in the image
NOTE: Hue adjustment is only available for video input.
Allows you to adjust the color saturation of the video image. Use
makes video image looks monochrome
makes video image looks colorful
NOTE: Saturation adjustment is only available for video input.
Returns your monitor color settings to those that were set at the time of manufacture.
Push to go back to or exit the main menu.
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use
T he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD men
'Image Settings'.
Use the and buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Resets the display settings to the original factory settings.
Push to go back to or exit the main menu.
or button to adjust the saturation from '0' to '100'
or to adjust the sharpness from '0' to '100' .
or