Download Print this page

Maytag LAT8035AAE User Manual page 7

Advertisement

IIIIIIIIII
IIIIII
I
IIIIIIIIIIIIIIIIIIIIIII
IIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIII
II
I
MAINTAINING
THE WASHER
• Turn off the water faucets after finishing the
day's washing. This will shut off the water
supply to the washer and prevent the unlikely
possibility of damage from escaping water.
• Clean the control panel with a soft damp cloth
and glass cleaner. Do not use any abrasive
powders or cleaning pads.
• Clean the cabinet with soap and water
followed with an appliance wax, if desired.
• The SELF-CLEANLLNTFILTER is located under
the agitator on the bottom of the washtub. The
lint filter in this washer cleans itself. During the
wash and rinse portion of the cycle, lint is
collected on the filter. The filter is then flushed
automatically during the spin and drain.
STORING
THE WASHER
Washers can be damaged if water is not
removed from hoses and internal components
before storage. Prepare the washer for storage c
follows:
• Select the NORMAL cycle on Regular Fabrics
and add one cup of bleach or white vinegar tc
a full load of warm or hot water without
clothes. Run the washer through a complete
cycle.
• Turn the water faucets off and disconnect the
inlet hoses.
• Advance the cycle control knob to the final sp:
of Regular Fabrics and lower the drain hose to
drain any water that may be in the drain hose.
• Disconnect the washer from the electrical supp
and leave the washer lid open to let air
circulate inside the tub.
PAGE 6
'111
IIIIIIIIIIIIIIIIIIIIIIIIII
II
IIIIIIIIIIIIIIIIIIIIII
I
III
I

Advertisement

loading