Advertisement
h,ase
make
these
simple
checks
b.@n'e
calling
for
service.
These
lips can save
you
time and mmwv
since
charqes
fi_r
TV installatiun
and
adjustment
of
L'zt.vlomer (otltrols
ar# 11o1
covered
undeF
your
warranty.
No Power
No picture
No Sound
Remote
Does Not
Work
TV Displays
Wrong
Channel
or No
Channels
Above
13
CAUTION: A vide() source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used witk such a source
the pattern of the non-moving portion of the game (CDI, elc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal TV viewing.
I
heck the TV power cord. Unplug the TV, wait I minule, then reinsert plug into outlet_
and push POWER button again.
I
Check to be sure outlet is not on a wall switch.
Check antenna connections on the rear of the TV. Are they properly secured to the
antenna plug on the TV?
Check the CABLE/YES
NO control lot con'ect position.
f
heck the VOLUME buttons.
[
Check the MUTE button on the remote control..
[* Check batteries. Replace v,,ith two Heavy Duty (Zinc Chloride) or Alkaline AAA
batteries if necessary,.
Clean the remote and the remote sensor window on the TV.
" Repeat channel selection.
.r
Add desired channel numbers (CHANNELS control) ino TV memory.
Check CABLE/ YES NO control for correct position.
This TV is equipped
with protective
circuitry
that shuts the TV off in case of moderate
power surges.
Should this occur turn the TV back on by pressing, the POWER
button
once or twice, or unplu,,• and then replut:, the power cord 'at the AC outlet.
This feature is NOT designed
to prevenl damage due to high power surges such as those
caused by, lightning,
v, hich is not covered
by your warranty.
Cleaning and Care
• To avoid possible shock hazard be sure the TV is unplug_,ed from the eleclrical outlet belk_recleaning.
• When cleanine the TV screen take care not to scratch or damaoe the screen surface (avoid v/earin_ jewelry or using,
anytlfing abrasive).
Vv'ipethe front screen v,,ith a clean cloth dampened wil:h water. Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap
or detergent.
Use a clean dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the cabinet back.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
2O
Advertisement
