Advertisement
m
re you tired of the sound of
commercials following you
into the next room or all through
the house? Smart Sound allows you
to preset a desired volume level
that the TV sound will not go
above. This makes for an even,
more consistent sound by reducing
the peaks and valleys that can
occur during program changes or
commercial breaks.
.,,.q'..,.
_"J,_
Press the Smart Sound button
on the remote.
"SMART SOUND" shows on the
TV screen.
<_
Press the Smart Sound
} button repeatedly
to turn the
volume level control ON (or OFF.)
_
Press the STATUS
button to
clear the screen
when completed.
0
U_h e the Volume Bar control to see
e TV s volume level settings
on the TV screen. Once set the
Volume Bar will be seen each time
the VOLUME buttons (on the TV or
remote) are pressed.
_,_
Press MEN_A
or
on the TV
(or on the remote press M button and
then M &• buttons.)
Select thetword VOL.BAR with the
TV's on-screen Arrow.
<_
Press (+) or (-) buttons to turn
I the VOL BAR control ON.
<_
Press STATUS button to clear
the screen.
1_
Remember,
Smart Sound works
only with the
programs coming
through the
Antenna/Cable
input on the rear of
the TV (RF audio).
It will not control
the sound levels for
the Auxiliary
(VCR/AUX IN)
audio inputs.
NOTE: SMART SOUND can al.so be
_lected
with the TV's
on-screen
Menu.
Just press the (+) or (-) buttons to turn
the SMART SOUND control ON or
IOFF.
Try it out.
Press the VOLA•
buttons. The
VOLUME BAR
should appear at the
bottom of the
screen.
Io
Advertisement
