Advertisement
!
--] _y
using the PIP buttons on the
I
remote the PIP picture can be
moved and swapped with the main
screen.
,,/ _
Press PIP ON button to show
the PIP picture.
PIP screen appears in corner of TV
screen. Press PIP ON again to
remove PIP from the main screen.
_
Press PIP POSITION button
on the remote to move the PIP
picture (from comer to comer on
the main screen).
<_
Prnss SWAP to
the main
swap
screen picture with the PIP picture.
Press SWAP again to return the
main screen and PIP to their
original positions. See the
important reminder below.
<_
Press FREEZE button to hold
the current Main picture in the PIP
window (Main picture is active).
If PIP is currently OFF the PIP will
be automatically shown.
Press FRZ repeatedly to update the
frozen PIP with current pictures.
The frozen PIP cannot be swapped
with the main screen.
Press the PIP ON/OFF button to
drop the frozen PIP picture from
the
scion.
•
continue to next page
4
_"---_.
Remember. If the PIP
picture is on the main screen
when the TV is turned OFF, a
blank screen will appear when the
TV is turned back ON again.
If this happens, you can either.
Press the CHANNEL A or V
buttons to select a channel for
viewing (if the AUXI or AUX2
mode has been added to TV's
channel memory - see page 29).
Use the Picture Source Select
control (see page 16) to return the
TV to the ANT/CABLE mode.
3. PIP SWAP
2. PIP POSITION
4. FREEZE
I. PIP ON / OFF
52
Advertisement
