Philips 50P8341 Directions For Use Manual page 55

General Information • Helpful Hints
M
If you are having difficulties with your product, check this list of difficulties and possible solutions before requesting sel-vice. You
may be able to solve the problem yourself. Charges tbr TV installation and adjustment of customer controls are not covered under
your warranty. If you need to call a customer sel-vice representative, please know the model number and serial number of your prod-
uct before you call. This int\_rlnation is displayed on the back of the product. Also, please take a moment to identi_ the problem you
are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with opera-
tions, please stay near the product. Our representative will be happy to assist you.
CAUTION
The continual presence of nonmoving images on your TV screen can damage the picture tube.
A video source such as a video game, CDI, or TV information channel that shows a constant nonmoving pattern on the TV screen
can damage the picture tube. When your TV is continuously used with such a source, the nonmoving portion of the on-screen image
can become permanently fixed on the picture tube. When you are not using the video source, mrn it off. Also, regularly alternate the
use of such video sources with normal TV viewing.
Cleaning and Care
• To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning.
• When you are cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using anything
abrasive. Wipe the front screen with a cloth dampened with water. Use even, easy, vertical strokes when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water. Use a clean, dry cloth
to dry the wiped surfaces.
• Never use thinners, insecticide sprays or other chemicals on or near the cabinet, as they 1night cause permanent marring of the
cabinet finish.
No power
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote control
power or TV power/standby button again. The location ofthe TV po_'er/standbv button is illustrated on page *S-2.
• Check that the outlet is not on a wall switch.
• If you are using an AC power strip, be sure the fuse on the power strip is not blown.
No picture
• Check antenna or cable connections to your TV. Be sure they are secure. Details' are onpages *S-l, *S-2, 49, 53, and 54.
• Check the Tuner Mode control for the correct tuner setting. Details' are on page *3'-5.
• Try running the Auto Pro_am feature. Details are onpage *S-5.
• Press the AV button on the remote to ensure that the correct signal somce is selected (Tuner-A, Tuner-B, AV 1, CVI, AV 2, or
AV 3). Details are on page 43.
No Sound
• Check the volume buttons. Details' are on pc(ges *S-2, *S-3, and 42.
• Check the mute button on the remote. Details' are on page *S-3.
• Check the Audio Out and Speaker controls. Details' are on pc(ges 35 and 36.
• If you are attempting to connect auxiliary equipment, check the audio connections. Details' are on pages *S-7, *S-8, 53, and 54.
• If applicable, check the audio receiver for the correct operating mode. Details' are on page 36.
Remote does not work
• Check the batteries. If necessary, replace them with AA heavy duty (zinc chloride) or alkaline batteries. Derails are on page *S-2.
• Clean the remote control and the remote sensor window on the TV. To locate the TV remote sensor window, see page *S-2.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote power or
TV power/standby button again. To locate the TVpower/standl_v button, seepage *S-2.
• If you are using anAC power strip, be sure the fuse on the power strip is not blown.
• Check to be sure the TV is not on a wall switch.
TV displays wrong channel or no channels above 13
• Select the channel again.
• Add the desired channel numbers into the TV using the Channel Edit control. Details' are on page *S-6.
• Check to be sure the tuner mode is properly set.
*S refers to the Setup and Quick Use Guide that came with your TM
55