Audio Language/Soundmode - Philips DVD781CH Owner's Manual

Audio Language/Sound Mode31
The DVD Player allows you to select a Languagefor DVDs or a
Sound Mode for Audio CDs.
[_ Language
I
Press the AUDIO button during playback.Within 15 sec-
onds, press the Air buttons to select the desired lan-
guage.
• The languagecan be changed only if multiple languagesare avail-
able on the DVD.
I__Press the A/v buttons.
_Press the A/v buttonsagain.
_Press the _/v buttons again.
...
O ®
_H _ C_SPLAY DI_,CSEUE_
_ _ CZ2_
MO_- SETUp
o O
E3 CZ3 _3
_CD_ .....
C3 C_3 G
ENTER _R_
C_ZD C_ O
PHILIPS
_,:_¢D s olsc
AUDIO I AUDIO 2
JAUDIO CD] Sound Mode
I
Press the AUDIO button during playback, then press the
A/_ buttons until the sound mode you want appears.
• When producers record anAudio CD, they record the sound
on two channels - the left and the right.You can chooseto hear
the sound on the left channel,the sound on the right channel,or
the sound on both channels(Stereo).Youwill select L-CH, E-
CH, or STEREO.
_ Only the right channel is active.
---_ Only the left channel is active,
Helpful Hints
If a desired language is not shown
after pressing the A/v buttons sev-
eral times, the DVD does not have
that language.
The display will disappear after about
15 seconds. Or, press the AUDIO but-
ton a second t_meand the display
will disappear automatically
Some DVDs only allow you to change
the language in the Disc menu.
When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound mode
of audio CDs cannot be changed.