Advertisement
_o
e TV s audio/video
input jacks are ]'or direct picture
and
und connections
between
the TV and a VCR (or similar
device)
that has audio/video
output .jacks. Both the AV1 and AV2
Input Jack connections
are shown on this page, but either one can
be connected
alone. Follow the easy steps below to connect your
accessory
device to the AV1 and AV2 in ,lacks h)cated on the back of
the TV
Connect the VIDEO (yellow) cable to the VIDEO AV1 in
(or AV2 in) jack on the back of the TV,
Connect
the AUDIO
(red and white) cables
to the
AUDIO (left and right) AV1 in (or AV2 in) jacks on the
rear of the TV,
Connect the VIDEO (yellow) cable to the VIDEO OUT
jack on the back of the VCR (either one or two) or acces-
sory device being used.
Connect the AUDIO (red and white) cables to the
AUDIO (left and right) OUT jacks on the rear of the VCR
(either one or two) or accessory device being used.
Turn the VCR (either one or two) or accessory device
and the TV ON.
Press the CH + or - buttons
on the remote control
to
select the AV 1 channel
for accessory
device number
one, or
the AV2 channel
for accessory
device number
two, AVI or
AV2 will appear
in the upper left comer
on the TV screen
depending
on the channel
chosen.
With either of the VCRs (or accessory
devices)
ON and a
prerecorded
tape (CD, DVD, etc.) inserted,
press the
PLAY button
to view the tape on the television.
Note: The Audio/Video cables needed for this connection are
not supplied with your TV. Please contact your dealer or Philips
at 800-531-0039 for information about purchasing the needed
cables.
AVI
Connection
S:oO0 ®
0000
OGO
@®®
®@®
@®®
®®O
VCR
ONE
(or accessoI_2
device)
(EQUIPPED
WITH
VIDEO
AND
AUDIO
OUTPUT
JACKS)
AV2
AUDIO
IN
Connection
(RED/WHrl
@
ANT/CABLE
R
L
AUDIO
OUT
VIDEO
OUT
BACK
OF TV
S VIDEO
VIDEO
IN
(YELLOW)
VCR TWO toraccessor
(EQUIPPED WITH VIDE
AUDIO OUTPUT JACKS)
Component
Video inputs provide for the highest possible
color
and picture
resolution
in the playback
of digital signal
source
material,
such as with DVD players.
The color difference
signals
(Pb, Pr) and the luminance
(Y) signal are connected
and received
separately,
which allows fi)r improved
color bandwidth
#¢brma-
tion (not possible
when using composite
video or S-Video
connec-
tions).
Connect
the Component
(Y, Pb, Pr) Video OUT jacks
from the DVD player (or similar device)
to the (Y, Pb, Pr)
in(put) jacks on the TV. When using the Component
Video
Inputs,
it is best not to connect
a signal to the AVI in Video
Jack.
Connect
the red and white AUDIO
CABLES
to the
Audio (left and right) output jacks on the rear of the acces-
sory device to the Audio (L and R) AVI in Input Jacks on
the TV.
Turn the TV and the DVD (or digital accessory device)
ON.
Press the CH +, - buttons to scroll the available channels
until CVI appears in the upper left comer of the TV screen.
Insert a DVD disc into the DVD player and press the
PLAY _- button on the DVD Player.
w
The description
for the component
video connectors
may differ
depending
on the DVD player or accessory
digital
source equip-
ment used (for example,
Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb).
Although
abbreviations
and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors,
and Y indicates
the luminance
signal.
Refer to your DVD or
digital
accessory
owner's
manual
for definitions
and connection
details.
CVI
S_EP
0 0 ®
0000
0@0
The CVI
colmeclion
will be dominate
over
the AVI
in Video
Input.
When
a Componenl
Video
Device
is connected
as described,
it is best
nol to have
a video
signal
connected
Io the AV I in Video
Input
jack.
BACK
OFTV
ACCESSORY
DEVICE
EQUIPPED
WITH
COMPONENT
VIDEO
OUTPUTS.
S.VIDEO
Advertisement
