Setting The Controls - LG LFX23961 Series Owner's Manual

Hide thumbs Also See for LFX23961 Series:
Table of Contents

Advertisement

SETTING THE CONTROLS
The LED display shows the temperature settings, dispenser
options, and the water filter, door alarm, and locking status
messages.
O Dispenser
selection
indicator
Shows cubed ice or crushed ice selection that will be
dispensed when the push switch is pressed.
Freezer temperature
Indicates the set temperature of the freezer compartment
in Celsius or Fahrenheit.
Refrigerator
temperature
Indicates the set temperature of the refrigerator
compartment
in Celsius or Fahrenheit.
O ice Plus
When the ICE PLUS button is pressed, the display will
indicate the selected function has been activated.
Q Dispenser
light indicator
When the LIGHT button is pressed, the display will
indicate the selected function: The dispenser light is on,
this indicator will appear on the display panel.
Q Door alarm indicator
This indicator shows that the door-open warning alarm is
activated,
O Water filter status
This indicator shows the current status for the water filter.
See the filter indicator.
Q Lock status
This indicator shows the current status for the control
panel functions is set to LOCK.
ADJUSTING
THE TEMPERATURES
AND
DISPLAY
Adjust Freezer Temperature
To adjust the temperature in the freezer compartment,
press
the FREEZER button to cycle through the range of available
settings.
Adjust
Refrigerator
Temperature
To adjust the temperature in the refrigerator compartment,
press the REFRIGERATOR
button to cycle through the
range of available settings.
NOTE: The actual inner temperature varies depending on
the food status, since the indicated temperature setting is the
target temperature and not the actual temperature within the
refrigerator. Initially set the REFRIGERATOR
CONTROL at
37°F (3°C). Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
illustrated above.
Temperature
Display
To change the temperature display from Fahrenheit to
Celsius:
- Simultaneously
press and hold the FREEZER and
REFRIGERATOR
buttons for more than 5 seconds.
- DO the same to convert back to Fahrenheit.
OPERATING
THE DISPENSER
Dispensing Crushed Ice
Press the ICE TYPE button to
illuminate the Crushed and
Cubed Ice icon.
Press the push switch with a glass or other
container and crushed ice will be dispensed.
Press the push switch with a glass or other
container and cubed ice will be dispensed.
NOTE: Hold the glass or other container in place for a
couple of seconds after dispensing ice or water to catch the
last few cubes or drops. The dispenser is designed not to
operate while either refrigerator door is open.
DISPENSING
WATER
i
Press the push water switch or activate
water button with a glass or other
container and chilled water will be
dispensed.
When the water switch or water button is pressed, the light
will be illuminated.
16

Advertisement

Table of Contents
loading

Table of Contents