Staffing Your Washer - KitchenAid KAWS750G Use & Care Manual

_* • _ _r _.)L_ ¸/ "_,_ ' _,"_ _ , •
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Measure detergent and pour it into the washer. If
desired, add powdered or liquid color safe bleach. Add
extra detergent for the Extra Wash cycle.
Drop a sorted load of clothes loosely into your washer.
• Load evenly to maintain washer balance. Mix large
and small items.
• Items should move easily through the wash water.
Overloading can cause poor cleaning.
• To reduce wrinkling of permanent press clothes and
some synthetic knits, use a large load size to provide
more space (see step 5).
2. (OPTIONAL STEP) Pour measured liquid chlorine
bleach into the liquid chlorine bleach dispenser. Bleach
will be diluted automatically during the wash part of the
cycle.
• Never use more than 1 cup (250 mL) for a full load.
Use less with a smaller load size.
• Follow the manufacturer's directions for safe use.
• To avoid spilling, use a cup with a pouring spout, Do
not let bleach splash, drip, or run down into the
washer basket.
• Use only liquid chlorine bleach in this dispenser.
3. (OPTIONAL STEP) Pour measured liquid fabric
softener into the liquid fabric softener dispenser.
Softener is added automatically during the rinse
portion of the cycle.
Dilute liquid fabric softener by filling the dispenser with
warm water until liquid reaches the crossbar in the
opening.
• Do not spill or drip any fabric softener on the
clothes.
• Use only liquid fabric softener in this dispenser.
4. Close the washer lid.
5. Turn the LOAD SIZE selector to the correct setting for
your wash load and the type of fabric being washed.
• Choose a load size that allows the load to move
freely for best fabric care. See "Loading."
• To change the load size selection after the washer
has started filling, turn the selector to the desired
setting. On models with a Reset option, first move
the selector to RESET, then to the new load size.
6. Turn the TEMPERATURE selector to the correct setting
for the type of fabric and soils being washed. Use the
warmest water safe for fabric. Follow garment label
instructions.
6