Advertisement
HOW TO USE YOUR HEATER
FITTINGTHEWHEELS
Remove the feet with the bracket wheels from the polystyrene packing. Turn the radia-
tor upside-down
and rest on the polystyrene.
Fit the wheels to the spindles on the feet and push firmly until they click into position.
Pull each wheel to check that it is correctly inserted.
The feet with the casters must be fitted with two arc-shaped
brackets only between the
1st and 2nd element and the penultimate (see fig. 1 to 3 inclusive).
fig. 1
ig. 2
ig. 3
1. LOCATION
Placeheateron floor beneath coldest window in the room or any desiredlocation.Your
heater will minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
Do not usethis radiator in rooms having a surface area lessthan 4 m2(43 sq. ft.)
2. CONNECTION
The radiator must be connectedto a properly polarized A/C 110/120 V household
outlet in perfect working conditions.
Keep loose clothing or bedding, furniture and flammable material away from the wall
outlet where the heater plug is fitted in.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. Thisis a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Hide quick links:
Advertisement
