Usb Data Cable; Call - Nokia 6111 User Manual

Select Menu > Settings
on the settings, select
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete, if the contacts or calendar are full.

USB data cable

You can use the USB data cable to transfer data between the phone and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the phone for data transfer or picture printing, connect the data
cable; when the phone displays
OK. Select from the following modes:
Default mode—to use the cable for PC Suite
Printing—to print pictures directly from the phone using a compatible printer
To change the USB mode, select
cable > Default mode

■ Call

Select Menu > Settings
Call forwarding (network service)—to forward your incoming calls. You may not
be able to forward your call, if some call restricting functions are active. See
restrictions in "Security," p. 58.
Anykey answer > On—to answer an incoming call, briefly press any key, except
the end key and the left and right selection keys
Automatic redial > On—to set your phone to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt
Audio enhancing > Active—to enhance speech intelligibility especially in
noisy environments
1-touch dialing > On—to activate 1-touch dialing. To set up 1-touch dialing,
see "1-touch dials,"' p. 45. To dial, press and hold the corresponding number key.
Call waiting > Activate—to set the network to notify you of an incoming call
while you have a call in progress (network service). See "Call waiting," p. 22.
Summary after call
(network service) of the call after each call
Send my caller ID > Yes, No, or
Slide call handling—to change the slide opening function to answer and end a
call when the slide is opened or closed
> Connectivity
Initializing sync or
USB data cable connected. Select
Menu
or Printing.
> Call and from the following options:
> On—to briefly display the approximate duration and cost
Set by network
> Data transfer > Server
Initializing copy.
> Settings > Connectivity
(network service)
S e t t i n g s
sync. Depending
mode., select
> USB data
Call
55