How To Use Menu Functions - Panasonic TH-32LRU20 Operating Instructions Manual

How to Use Menu Functions

Menu list
Menu Item
Resets all picture adjustments to factory default settings except for "Advanced picture".
Reset to defaults*
Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 32)
Picture mode
Back light Adjusts the luminance of the back light.
Adjusts color, brightness, etc. for each picture mode to suit your taste
•
Contrast, Brightness, Display range
Contrast/Brightness/Color/Sharpness: 0 - 100
Color, Tint, Sharpness
Tint:
Color temp. Selects a choice of Cool (blue), Normal, or Warm (red) color. (Cool/Normal/Warm)
Color mgmt. On: Enhances green and blue color reproduction, especialy outdoor scenes. (Off/On)
Controls dark areas without affecting the black level or brightness in the overall picture
A.I. picture
(Off/On)
Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
C.A.T.S.
Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On)
Video NR
Changes the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Screen format
Lets you choose the aspect depending on the format of received signal. (p. 30)
Adjusts the horizontal display range to reduce noise of both side edges of an image. (Size 1/Size 2)
H size
Size 2: Adjusts the image size according to the aspect mode for to reduce noise. (p. 32)
PC adjustments Sets PC display (p. 16)
3D Y/C filter Minimizes noise and cross-color in the picture. (Off/On)
Selects image resolution of component-connected devices (SD/HD)
•
SD: Standard Definition
Color matrix
•
Only used with 480p video signal.
MPEG NR Reduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Black level Selects Dark or Light. Valid only for external input signals. (Dark/Light)
Resets Bass, Treble, and Balance adjustments to factory default settings.
Reset to defaults*
Increases or decreases the bass response.
Bass
Treble Increases or decreases the treble response.
Balance Emphasizes the left / right speaker volume.
Surround Enhances audio response when listening to stereo. (Off/On)
Volume leveler Minimizes volume disparity after switching to external inputs.
Switches to "Off" when using external speakers (Off/On)
TV speakers
•
"Surround" and "Volume leveler" do not work if "Off" is selected.
HDMI 1 in The default setting is "Digital" for the HDMI connection. (Digital input signal)
HDMI 2 in Select audio input terminal when DVI cable is connected. (Analog audio input signal)
(Digital/Component/Video 1/Video 2)
HDMI 3 in
In the AV mode, the Audio and Setup menus give fewer options.
* Confirmation screen is displayed. Select "Yes" and press OK to reset.
20
Adjustments/Configurations (alternatives)
-50 - +50
HD: High Definition
(Continued)
Menu list
Menu Item
Timer
Sleep The TV can automatically turn Off at the designated time (0/15/30/60/90)
Lock
Locks the programs. (p. 22)
Closed caption Displays subtitles (Closed caption). (p. 26)
ANT/Cable setup Sets channels. (p. 24)
Input labels Selects the terminal and label of the external equipment (p. 27)
Audio out To prevent howling, stops output of audio specified in this menu. (p. 27) (On/Off)
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
Power save
room. (Standard/Saving)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
•
Not in use when "Lock" is set, or while "SD mode" or "Digital Channel" is selected.
No signal for 10
•
"No signal for 10 minutes was activated" will be displayed for about 10 seconds when
minutes
the TV is turned on for the first time after the power was turned off by "No signal for 10
minutes".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
•
No activity for 3
Not in use while "PC input" is selected.
•
hours "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Image viewer Set "Thumbnail" to play back SD cards automatically.
auto play (Thumbnail/Off)
Displays TV version and software license.
About
Performing Reset will clear all items set with Setup, such as channel settings.
Reset to defaults
Adjustments/Configurations (alternatives)
21