Noise Reduction; Input Signal Display - Panasonic TH-42PF30ER Operating Instructions Manual

• Noise reduction

Sets the following three NR (Noise Reduction) functions together.
P-NR, Mosquito NR, Block NR
Advanced NR
Sets the three NR functions separately.
1
2
P-NR: Automatically reduces unwanted picture noise.
Mosquito NR: Reduces mosquito noise around subtitles on MPEG videos.
Block NR: Reduces block noise when playing MPEG videos.
Note:
Noise reduction cannot be adjusted while a PC signal is being applied.

• Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during DVI signal input.
Press to select "Noise reduction".
Press to select "Off", "Min" , "Mid" , "Max" , "Advanced".
Press to select "Advanced".
Press to enter Advanced NR.
Press to select P-NR, Mosquito
NR or Block NR.
Press to select "Off", "Min", "Mid",
"Max".
Setup for Input Signals
Noise reduction
[ AV ]
Advanced NR
P-NR Off
Mosquito NR Off
Block NR Off
[ Component ]
Advanced NR
P-NR Off
Mosquito NR Off
Block NR Off
Signal Format
Dot Clock Freq.
Signal Format
( )
Off
Noise reduction Advanced
[ RGB ]
Advanced NR
P-NR Off
Mosquito NR Off
Block NR Off
[ Digital ]
Advanced NR
P-NR Off
Mosquito NR Off
Block NR Off
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
1280×1024/60i
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
108.0 MHz
1280×1024/60i
51