Advertisement
Device Driver Uninstallation
Disconnect other USB devices in advance.
•Turn the NP10 on and connect it to the computer with a USB cable.
•When uninstalling, log on to the computer using "Administrator" (Windows 2000) "Computer Manager" (Windows XP).
1.Press the [Start] button, and open the [Control Panel].
•With Windows 2000, the [Control Panel] is contained
under [Settings].
2.Open [System].
•With Window XP, if [System] does not appear, select
[Performance and Maintenance] and then open [System].
3.[System
Properties]
[Hardware] tab.
4.Press the [Device Manager] button.
5.Press the [+] mark of the [Universal Serial Bus
controllers] to change it to a [–] mark.
6.Select [USB Composite Device] and press the
"Delete" button.
•If there are multiple [USB Composite Device], other USB
devices are connected. First disconnect the other USB
devices before performing this operation.
•The delete confirmation screen will appear, so press the
[OK] button to execute the deletion.
7.Close the [Device Manager] screen and [System
Properties] screen.
8.Turn the NP10 off and disconnect the USB cable.
•This completes the uninstallation.
4
will
open,
so
select
the
(6.)
Advertisement
