156
Vehicle care
Tail lights
Rear brake, tail, turn signal,
reverse and fog tail light
1. Open the tailgate and remove
2 screws and lamp assembly.
2. Remove bulb holder by rotating it
anticlockwise.
3. Remove bulb from bulb holder by
pressing the bulb in and rotating it
anticlockwise.
4. Insert new bulb into bulb holder.
5. Reinstall bulb holder into lamp
assembly. Rotate bulb holder
clockwise and ensure it is secure.
6. Replace lamp assembly by
guiding lugs on lamp assembly
into their corresponding
apertures.
7. Replace 2 screws removed earlier
and close the tailgate.
Side turn signal lights
1. Using a suitable screwdriver, pry
lamp assembly away from wing.
2. Rotate bulb holder anticlockwise.
3. Remove bulb from lamp assembly
by pulling bulb straight out of bulb
holder.
4. Insert new bulb into bulb holder by
pressing it in and rotating the bulb
holder clockwise.
5. Push lamp assembly back into
aperture.