Opel CORSA Owner's Manual page 179

Alloy wheels: Disengage wheel
bolt caps with a suitable
screwdriver and remove. To
protect the wheel, place a soft
cloth between the screwdriver
and the alloy wheel.
2. Install the wheel wrench ensuring
that it locates securely and
slacken each bolt by half a turn.
3. Ensure the jack is positioned
correctly with the vehicle jacking
points.
With versions of the Corsa OPC
with sill panelling or retrofitted sill
panelling, no jack must be used.
The vehicle may be damaged.
Vehicle care
4. Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Variant 1:
177