Opel Adam Owner's Manual page 177

8. Ensure that the seals are applied
to the bulb holder and fixing
screws.
9. Insert the bulb housing in the
body, engaging the lug and the
ball pin in the recesses. Tighten
the fastening nuts using a wheel
bolt wrench. Attach the plug
connector. Close and engage the
flap.
Saloon 4-door
1. To replace bulbs, fold up cover in
load compartment after twisting
the catch.
Vehicle care
2. Release the bolts behind the
cover using a conventional bolt
wrench, and remove.
3. Unscrew the three screws with
a screwdriver and remove the
bulb holder. Vehicle tools 3 190.
177