[3D Setup]*: Sets 3D features.
•
•
[3D Detect]: Sets 3D Detect
mode.
[3D Type]: Manual setting of
•
3D Type. [3D Detect] must be
manually set).
[Left-Right Swap]: Sets the mode
•
for Left-Right Swap.
•
[3D Scene]: Sets the 3D depth
of field.
[TTX Language]: Sets the teletext
•
language (Only available in TV mode).
[Color System]: Sets the AV color
•
system. (Only appears for the AV
mode).
[HDMI]: Sets the HDMI mode.
•
(Only appears for 480p / 576p / 720p
/ 1080p HDMI mode.
•
[Reset]: Reset default settings.
(Excludes password settings and
channel information).
* Available on PFL4308 series.
Change picture format
1
Press
ADJUST and select [Settings].
2
to select [Picture Format].
Press
3
Select a picture format.
4
Press OK to confirm.
Summary of picture formats
The following picture settings can be configured.
Note
•
Depending on the format of the picture source, some
picture settings are not available.
[16:9]: Scales the classic
standard ratio into a wide
screen format.
[4:3]: The classic standard
format.
[Zoom 1]: Horizontal
extension to a wide screen
picture format. When using
this format, the left and
right sides of the picture
frames will be cropped off.
[Zoom 2]: Scales the
standard ratio into a wide
screen format.
(Only Standard, Wide
screen and Point To Point
options are available when
in PC mode).
[Point To Point]: Applicable
for HDMI connection to
PC. The full screen from
the PC will be shown to
reap the best effectiveness
in display.
EN
13