Download Print this page

KitchenAid Aquasense filters Instructions page 2

Water filtration and monitoring systems

Advertisement

dn the dispenser
without the,water
filter
You c_n run the dispenser without _ water filter cartridge.
Your v_ater will not be filtered. If you run the dispenser
without a water filter cartridge,
keep the cartridge cap
and replace it in the base grille for future use.
1. Remove the water fitter cartridge (See "Changing a
water filter cartridge" earlier n this section.) Then slide
the cartr dge cap off the end of the filter cartridge.
DO NOT DISCARD THE CAP.
2. With the cartridge cap in the vertical position, insert
the cap into the base grille until it stops.
3. Rotate the cartridge cap to a horizontal position.
NOTE: The cartridge cap may not be even with the
base grille.
Ordering]
replacement
filters
To order more water filter cartridges,
call
1-800-442-9991.
When replacing your
factory-installed
water filter, ask for accessory
Part #4392857.
2

Advertisement

loading

This manual is also suitable for:

Aquasense