Page 2
ASSEMBLY ASSEMBLY ASSEMBLY ASSEMBLY INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS Unpack the contents of the box and make sure that all items are accounted for and in good condition. 2. 2. 2. 2. Select a flat, level surface for the assembly. Place the fountain top onto the basin making sure to align and insert the posts on the underside of the fountain top into the post holes on top of the basin.
Page 3
noticeable decrease in performance is detected. Failure to clean the pump will result in overheating of the pump. . 7. Before cleaning, always disconnect the pump from the power source. 8. Disassemble the pump by removing the filter and regulator/impeller plate. Remove the impeller/rotor assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the area inside of the pump housing.
Need help?
Do you have a question about the FC0166AB and is the answer not in the manual?
Questions and answers