Advertisement
Remove
the two bottom hinge screws and
hinge i fnecessary.
!
2 Trace lightly around the hinge w ith a
pencil. This makes reinstallation
easier.
3 Detach the water tube from theconnector
located below t he freezer door. The
connector
releases
when y ou press its
outer sleeve inward.
4 Remove
the screws from the tophinge
and pull t he multi-wire
cable t hrough it.
Lift t he door o ffofthe bottom hinge.
5 Remove
the two bottom hinge screws and
hinge i fnecessary,
To Disconnect
1. Press outer ring against face
Adjustable Hinge
To reinstall the refrigerator
door, reverse the
above steps.
To remove the freezer
top hinge
cover:
1 Remove the two screws from each cover
over the top door hinges.
2 Lift hinge cover straight up and off,
Front
Rear
Cover Screws
Cover
Top Hing
Cover
Hinge
Multi-Wire
|
Hinge
To remove
i Detach the multFwire cable connector
located above the top hinge. Grasp both
sides of the connector firmly and pull apart.
remove tube
push until mark touches
face of fitting
Water
Tubing
e
Assembly
Screws
Adjustable Hinge (some models)
Tubing
Hinge
Assembly
Screws
Non=Adjusting Hinge (some models)
6 Lay the door on its side to avoid damage
to the water tube extending from the
bottom hinge.
To reinstall the freezer door, reverse the above
steps.
Besuredoorsare set asideina secureposition
wherethey cannotfall andcausepersonal i njury.
Advertisement
