Advertisement
Adjusting
Your Oven Temperature (cont'd)
INSTRUCTIONS
3.
Press 40
to accept the temperature change and the display
will return to the time of day (Fig. 3). Press _
to reject the
change if necessary.
To adjust
the oven temperature
lower:
1.
Press 'O
for 6 seconds (Fig. 4).
2.
To decrease the temperature use the number pads to enter the
desired change. (Example-30°F)
(_
(_
and then press
_
(Fig. 5). The temperature may be decreased
as much as
35°F(19°C).
3.
Press4
to accept the temperature change and the display
will return to the time of day (Fig. 6). Press _
to reject the
change if necessary.
PRESS
DISPLAY
@
@
@
@
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Oven
Light
Wir_
Holder
Changing
the Oven Light
The oven light bulb is located at the rear of the oven and is covered with a glass
shield held by a wire holder. The glass shield must be in place whenever the oven is
in use.
To replace
the oven light bulb:
1.
Turn electrical power off at the main source or unplug the range.
2.
Press wire holder to one side to release the glass shield.
3.
Replace bulb with a new 40 watt appliance bulb.
4.
Replace glass shield over bulb and snap wire holder into place.
5.
Turn power back on again at the main source (or plug the range back in).
6.
The clock will then need to be reset. To reset, see Setting the Clock and
Minute Timer.
Be sure the range is unplugged and all parts are COOL before
replacing oven light. Wear a leather-faced glove for protection against possible
broken glass.
35
Advertisement
