Table of Contents
Advertisement
Starting
the Self-Clean
Cycle or a Delayed
Start Self-Clean
Cycle (including
Speed Clean)
satisfactory results, press the _
(Speed Clean) pad for a 2 hour Self-Clean cycle (for lighter soils). Press the
For
(Clean) pad for a 3 hour cycle (for heavier soils). NOTE: The kitchen area should be well ventilated using an open window,
ventitlation fan or exhaust hood during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with
the 1st Self-Clean cycle.
To Set the Controls
for a Self=Clean
Cycle or a Delayed
Start Self=Clean
Cycle:
(Note: If you do not want to start a Delayed Self-Clean Cycle, skip steps 2 & 3.)
1.
Be sure the clock shows the correct time of day.
2.
Press _.
The " : " in the time of day will flash.
3.
Press and hold the A
pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired
time is displayed.
4.
Press _
(for 2 hour Self-Clean time) or _
(for 3 hour Self-Clean
time).
5.
Press the ,/_ or V
pad. The time selected in step 4 above should appear in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light
will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).
6.
"CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled.
When the Self-Clean
Cycle has Completed:
1.
The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3.
If "End" is in the display and the Clean indicator light remains ON, press _/_.
The time of day will appear in the
display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping
or Interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self=Cleaning cycle:
1.
Press _,
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3.
Restart the Self-Clean cycle once all conditions have been corrected.
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid
possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
17
Advertisement
Table of Contents
