Sears Kenmore 15559 Owner's Manual page 11

Changing
CoDor
If you are redecorating, you can change your dishwast>
er's front panel to match or blend with your new colors.
The panel is held in place by the door trim and the
trim on the panel belmv the door. Each side of each
panel is a different color. Or you can paint the panel
with the color of your own choice.
WARNING:
To prevent electric shock, disconnect
electrical power supply to dishwasher before changing
panels.
How
to
change the door panel:
t. Take out trim screws on either side of dishwasher
door. Remove side trim,
2. Slide out the door panel. (Careful--edges may be
sharp.)
3. Thrn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim andScrews.
How to change the bottom panel.
I. Remove the bottom panel attachment screws.
TOP
MOUNTING
2. Remove the top mounting screws.
3. Take out the top trim screws and remove the top
trim.
4. Slide the color panel(s) up and out and put the
color you want in front.
5. Replace the top trim and screws.
6. Replace the entire access assembly by reversing the
steps.
DO NOT operate dishwasher while changing panels
or when bottom access panel is removed.
Wood Panel Trim Kits
Wood panel trim kits contain trim and instructions
for adding a decorative wood door panel and bottom
access panel no thicker than I/4" to match kitchen
cabinets.
Specify the trim color of your choice from the follow-
ing options:
GPF40BC (Chrome Trim and Screws)
GPF40BK (Black _'im)
GPF40WH (White Trim)
GPF40AD (,admond Trim)
Color Panels
If you have redecorated and the color panels in your
dishwasher do not blend with your new color scherne,
you may order an additional color panel.
Specify the color panel number when ordering:
GPF24 White/Ahnond
GPF26 HarvesttBlack
GPF27 Black/White
/
BOTTOM PANEL ATTACHMENT SCREWS
Ordering _nformation
Order a Trim Kit or a Color Panel, without charge, from:
Dri-View Manufacturing
4706 Allmond Ave.
Louisville, KY 40209
1t