Advertisement
TroubLeshooting
If there is no sound from
any of the speakers, check
the foLLowing:
• Receiver/ampLifieris on and
a source is playing.
• Review proper operation of
your receiver/ampLifier.
If there is no sound coming
from one speaker, check the
foLLowing:
• Checkthe "BaLance" control
on your receiver/ampLifier.
• Check at[ wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all. wires are
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
If the system ptays at tow
votumes but shuts off as
votume is increased, check
the foLLowing:
• Check aLL wires and connec-
tions between receiver/
amp|ifier and speakers.
• Make sure at[ wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/ampLifier.
If there is tow bass output,
check the foLLowing:
• Make sure the polarity
(+ and -) of the Left and
right "Speaker Inputs" are
connected properly.
If there is no sound from *
the center speaker, check
the following:
• Make sure that your receiv-
e(s Center Channel Mode is in
the "normaL" or "wide" posi-
tion. If it is in the "phantom"
position, the center speaker
wiLL not play.
• CheckaLL connections
between processor/ampLifier
and the center speaker.
Advertisement
