commercial cool CPN08XC9 User Manual page 6

Accessories nncJude
]° PJ!asficpanel- From 20" up to 46" °. 3 Pieces
2. Window Pane[ Adaptor .................. ! piece
3. Screws .......................................... 4 pieces
4. Exhaust hose connector .................. 2 pieces
5. Exhaust hose ................................. ] piece
6. Cover ........................................... ! piece
L_J
':4 .....
1. Adjust' the pJastic paneJ to the width or height of your window and
tighten the 2 screws that are attached to the panel
2. Pushthe round window pane[ adapter
through
the rear of the pJastic
panel Line up the hobs and tighten the adapter with 4 screws that are
included in the kit. (Tighten screws from the fronL)
3. [nstaJJ the window plastic pane[ into the window. Jf necessary use duct
tape to better secure the panel
4. Connect exhaust hose to the unit by inserting the hose connector that is
attached to the hose into the exhaust.
5_ Move the unit to the window, extend the hose and attach the other end
of the hose to the window. AJign the tabs on the hose and window
paneJ adapters and fasten them together.
6.
pi[lug into
wa[J outlet to get ready for operation.
B
,::#:Hose Connector Exhaust Hose Hose Connector
5