User Maintenance Instructions - Hotpoint WLW3000B Use And Care Manual

Care and Cleaning
USER MAINTENANCE
INSTRUCTIONS
The tub. The porcelain is self-
cleaning. Leave lid open after
washing to allow moisture to
evapolzae. Do not use harsh
or gritty cleansers.
The exterior. Wipe off any spills
of washing compounds. Wipe or
dust with damp cloth. Try not to
hit surface with sharp objects.
To store washer:
Ask service technician to remove
water from drain pump and hoses
to prevent freezing.
Do not store the washer where it
will be exposed to the weather.
For long vacations:
Be sure water supply is shut off at
faucets and drain all water from
hoses if weather will be below
freezing.
Lubricate
with grease
or
Petroleum
} Jelly.
The agitator. Remove at regular
intervals-about 4 to 6 months--
and remove any lint that may have
accumulated. No tools are needed,
simply grasp agitator with both
hands and pull straight up sharply.
The slotted section at the top of the
metal shaft has a light coating of
lubricant to prevent parts sticking
together. If this area appears to be
dry, apply a light coat of grease or
petroleum jelly around the slotted
section of the shaft before repla_cing
the agitator. Do not overgrease.
Excess grease may get into
clothes load.
When replacing the agitator,
carefully lower straight down
onto the shaft so that it fits into
the slots. Then apply downward
pressure until agitator snaps
into its normal position.
22